| Coolerguys Programmable Thermal Fan Controller with LED Display |
| Brand: Coolerguys
This item is no longer available
Media: Personal Computers
Shipping Weight (lbs): 0.5
Dimensions (in): 3.7 x 2.7 x 2
MPN: 840556090885
UPC: 840556090885
EAN: 0840556090885
ASIN: B002PNL0F4
|
|
|
Features:
| | Complete control over the temperature at which 12v devices plugged through it will turn on/off | | | 4 3pin 12v connectors, 24" Thermal Probe | | | Option to switch between Fahrenheit and Celsius Display | | | Can handle up to 2A(2,000ma) worth of devices | | | New Updated Model! As of December all units have a display only 30% as bright and you can now turn it on/off |
|
|
Similar Items:
|
|
|
Editorial Reviews:
Product Description
Coolerguys Programmable Thermal Fan Controller with LED Display - New Updated Model we listened to your complaints, all units now have a display only 30% as bright as our first revision and you can now turn the display completely off if you want to (it will still function as normal) To turn off the display: hold the C/F button in for 5 seconds, repeat to turn them back on
This thermal control unit allows complete control over the temperature at which 12v devices plugged through it will turn on and off
Features:
24" Thermal Probe (optional 48" and 72" probes available)
4 3pin connectors
4pin Molex pass through connector
4 Segment LED Display
Option to switch between Fahrenheit and Celsius Display
Fully Programmable from 32-211F (0-100C) (On temperature must be at least 2F/1C above turn off temperature)
Can handle up to 2A worth of devices
Works with all 12v devices from fans to lights
Size:
Device: 71mm x 40mm x 17mm
Cutout: 68mm x 37mm
This unit does require a power supply that has both 12v and 5v power lines, it presently works with computer power supplies and our Model #840556029977 2A AC-DC adapter
Instructions:
Start: Press once and the start up temperature will blink, use the right Up/Down buttons to set the temperature (note: it must be at least 2F/1C higher than the turn off temperature) press Start button again to return to the real time readout.
Stop: Press once and the turn off temperature will blink, use the right Up/Down buttons to set the temperature (note: it must be at least 2F/1C lower than the turn on temperature) press the stop button again to return to the real time readout.
C/F or Up: Will change display to and from Fahrenheit and Celsius or will increase the temperature when in the Start or Stop programming mode.
Down: Will decrease the temperature when in the Start or Stop programming mode. Not tested at extreme temperatures
|
